Description
Proroute H820 4G Router
Do you need a reliable and multi-functional LTE 4G Router for your remote monitoring and management project?
The Proroute H820 embedded industrial 4G router includes keep alive features such as Ping Reboot to ensure that the router will provide a reliable 3G/4G connection so you can install it at a remote location to provide convenient internet access via the 3G/4G network without having to worry about expensive and time consuming site visits to reboot the router.
Remote connection to the H820 is usually achieved by using a Fixed IP SIM card or if your choice of mobile network supports DYNDNS ie. your mobile network provides your connection with a public IP address and does not use CGNAT then the H820 4G router supports DDNS.
Of course the H820 includes a built-in firewall for security purposes and all the standard features you would expect from an M2M router including port forwarding, timed reboot, ping reboot and SMS reboot.
Technical Specification
3G/4G LTE Modem
Interface – 4G LTE (Upto 100Mbps) / DC-HSPA+ (Upto 42Mbps) / HSPA+ (Upto 21Mbps) / EDGE / GPRS / GSM
Peak Download Rate – 100 Mbps
Peak Upload Rate – 50 Mbps
Frequency Bands – LTE (800/900/1800/2100/2600 Mhz), WCDMA / 3G / HSPA+ (900/2100 mhz), EDGE/GPRS/GSM (900/1800/1900)
SIM Interface – 1.8V or 3V
Antenna Diversity – YES
4G MIMO – YES
Wi-Fi
WiFi 802.11b/g/n
SMS/Voice control
SMS/Voice features to control the router, checks status, reboot or notify of alarm incidents
Protocol Support
TCP, UDP, SMTP, POP, ICMP, FTP, PPP, PPPoE, DHCP, DDNS, DNS, SNMP, NAT, DMZ, ALG
VPN
VPN, IPSec, PPTP (client)
Security
Security 64/128-bit WEP (Wired Equivalent Privacy)
WPA & WPA2 (Wi-Fi Protected Access)
Advanced Firewall Features
Network Address Translation (NAT)
Stateful Packet Inspection (SPI)
VPN Pass-through
Media Access Control
CSMA/CA with ACK Certifications
RADIUS Client Interface
Dynamic Route Feature (BGP, OSPF)
LAN
4 X 10/100M LAN port (RJ45 interface)
WAN
1 X 10/100M LAN port (RJ45 interface) – enables failover from WAN to 4G
Router can be used as 4G failover router with option to use WAN port as primary internet connection with failover to 4G in the event that WAN internet becomes unavailable.
Antenna
1 X antenna for Wi-Fi (Mag mount)
2 X antenna for Cellular (Mag Mount)
LED Indicators
LAN, WAN, WIFI, CELL, Signal, VPN, SYS – Activity
Configuration Interface
Web/Telnet, Local RJ45 and WiFi
UIM/SIM Card Slot
Supports 1.8V/3V UIM/SIM cards
Power
Power supply DC7V-30V, typical DC9V 1A
Power consumption:
Idle: 15mA@9VDC
Max: 250mA@9VDC
Average:105mA@9VDC
Software
Device Management
WEB interface (Internet Explorer v6 or Later; Mozilla Firefox v1.5 or Later, or other Java-enabled Browsers, Chrome, Opera, Safari, IE6)
SNMP
SYSLOG
Minimum System requirements computer with:
Windows 7, Vista, Windows XP SP2, Windows 2000 SP4, or Mac OS® X (v10.4/v10.3), Linux
Internet Explorer 6 or Mozilla Firefox
Network Interface Card / WiFi
Physical
Operating Temperature
Storage: 72°F to 153°F (-40°C to 90°C)
Working: 36°F to 126°F (-30°C to 80°C)
Humidity: 95% Maximum (Non-condensing)
Dimensions
Item (L x B x H): 170mm x 105mm x 25mm